Your Guide to the 5 Best Floor Burnishers of 2022

Floor burnishers are an important component of a complete floor care program in any facility with hard floors. Burnishers are high-speed floor machines used to polish or burnish hard floors, bringing back the floor’s original shine. Keeping your facility’s floors in top condition and looking great relies on a quality floor burnisher.

但是，都一样吗？否。燃烧器提供几种不同的功能，包括各种电源，电动机，清洁路径尺寸等。

So, how do you decide which one to purchase?

Below we breakdown the 5 best floor burnishers of 2022 to help you narrow down your choices:

1. Clarke Ultra Speed Pro® 1500DC
2. TASKI ® ergodisc ® 1200
3. 进步ADVOLUTION™ 20XP
4. 进步BU800™
5. NSS eForce®

1. Clarke Ultra SpeedPro®1500Burisher

Manufactured by Nilfisk, this 20-inch walk-behind burnisher operates at 1,500rpm.This is the most cost-friendly burnisher but offers minimal features.

Power Source

The burnisher is cord-electric with a 50ft yellow cord.

只要塞入插座，绳索燃烧器就有无限的运行时间。Cord-electric machines are good for relativity small areas.

由于电动机为电动机供电和旋转地板垫所需的动力，可以使用多长时间的电源限制。为了在较大的区域使用，需要从插座转移到插座，这在不可用时可能会耗时和限制。

Motor

TheUltra SpeedPro®1500抛光剂has a belt drive motor.

Pro Tip : C ord-electric burnishers can be either direct drive or belt-driven. Direct drive is where the motor is mounted directly above the pad driver. On belt-driven models the motor is offset and connected to the pad driver with a pulley system. Belt-driven units can require more maintenance than direct drive. Belts can become worn and slip, increasing the likelihood of machine downtime and lower worker productivity.

Dust Control

这台机器没有尘埃控制。最初购买的没有灰尘控制的燃烧器更具成本效益，但是在不得不尘埃拖把或真空吸尘器时，您将花费更多的时间在劳动和清洁用品上。

Pad Pressure

The operator controls the pressure on the pad.Floor burnishers that require manual adjustments allow for operator error, increased mistakes, and potential damage to your floor.

Pro Tip:更多的垫压力并不意味着更多的光泽。调整垫压力以产生更大的向下压力不是最佳实践。它可能会损坏设施的地板并缩短机器的使用寿命。

阅读我们的comprehensive review of the Clarke® Ultra Speed Pro® 1500依靠这台机器。

2. TASKI® ergodisc® 1200 Burnisher

This is a 1200 rpm walk-behind burnisher manufactured by TASKI®.Although it is not best practice, this machine is especially suited for spray buffing and cleaning.

Power Source

This is a cord electric burnisher with a cord length of 82 ft.This machine has the longest power cord of the corded buffer options.

Motor

这个地板抛光剂配备了皮带驱动器电机。皮带容易滑动和拉伸，这可能需要更多的维护和机器停机时间。他们通常更安静为了帮助最大程度地减少白天清洁程序中的干扰。

Dust Control

这个地板磨光器不配备尘埃欺诈trol. Dust control is more expensive, but it saves workers the time they would otherwise be using to complete dust mopping procedures.

Pad Pressure

Theergodisc® 1200provides full pad to floor contact. The floating pad drive gives a constant working pressure and enables the machine to be used on uneven floors.

This burnisher is the only option to offer direct solution distribution.The cleaning solution/spray buff is distributed by an electrical spray unit. The spray solution is dispensed through the center of the pad, allowing the whole surface of the pad to be evenly wet.

阅读我们的Taski®Ergodisc®1200的全面评论依靠这台机器。

3. Advance Advolution™ 20XP Burnisher

Manufactured by Nilfisk, theAdvolution™ 20XPis a 20-inch walk-behind floor burnisher that runs at 2,000 rotations per minute (rpm).This burnisher operates at the highest speed when compared to the other 20-inch floor burnisher options.

Power Source

This is a cord-electric machine with a 75-foot power cord. Cord-electric machines are less productive than battery operated machines. Cords will require the operator to maneuver around the cord, ensuring they do not run over it. Cords will also have to be moved from outlet to outlet.

Motor

这是一个直接的开车底漆。直接驱动电动机在其一生中需要更少的维护。They do not have any belts to wear down, extending the life expectancy of the machine.

Dust Control

Advolution™ 20XP is equipped with the passive dust control feature.

This burnisher has a wrap-around skirt that tightly seals to the floor with small airflow openings that control dust. Powerful suction collects burnishing dust in the unit’s dual-port dust bag, providing total dust control for improved indoor air quality (IAQ).

尘埃控制功能可以通过消除抛光后消除灰尘的需求来提高生产率。尘埃控制还可以保护操作员和设施乘员的健康。

Pad Pressure

ADVOLUTION™ 20XP uses a patented天然气弹簧技术that precisely regulates the pad pressure for a maximum shine on hard floor surfaces.

阅读我们的comprehensive review of the Advance Advolution™ 20XP依靠这台机器。

4. Advance BU800™ Burnisher

The进步BU800™burnisher是一个20英寸的步行式底层磨砂机，由Nilfisk制造，以每分钟2,000旋转（RPM）运行。This is the most productive 20-inch walk-behind burnisher option

Power Source

This is a battery operated machine.与绳索电动抛光剂相比，电池操作的燃烧器可以提高生产率高达30％。Battery operated floor burnishers eliminate the need for the operator to have to plug and move cords into a new outlet.

Motor

It is available in traction or pad drive. Traction drive has two motors, one for driving/directing the machine and one for controlling the pad. Traction drive is more ergonomic for the operator.

Dust Control

该抛光剂配备了灰尘控制功能。

Dust control allows for increased worker productivity by eliminating the need for dust mopping after burnishing. Dust control also protects the health of the operators and facility occupants.

If you are interested in LEED certification for your establishment, you can increase your facility’s LEED score by using a burnisher with a dust control system. Dust control will help maintain a certain level of indoor air quality (IAQ).

Pad Pressure

进步BU800™Burnisher uses aself-regulating pad technologythat manages the pad pressure for a maximum shine on hard floor surfaces. The self-adjusting pad pressure ensures that the optimal power is applied to the pad driver. This eliminates the need to make any changes to the settings.This feature reduces operator error and potential damage to floors.

阅读我们的comprehensive review of the Advance BU800™依靠这台机器。

5. NSS eForce® Burnisher

This is a ride-on floor burnisher that operates between 1,500 and 1,700 rpm. Ride-on burnishers perform the same tasks as traditional burnishers but allow the operator to sit on the machine and maneuver it with hand controls. The ride-on feature helps reduce operator fatigue for increased productivity.

This machine is practical for areas larger than 2,000 square feet where smaller burnishers would be inefficient.TheNSSeforce®has a 27-inch cleaning path to help cover more ground in the same amount of time when compared to a 20-inch burnisher.

这是最昂贵的植物。

Power Source

This burnisher uses six, 6-volt 430 AH batteries which provide up to 3 hours of continuous run time.Battery operated burnishers are great for facilities that require a burnisher to reach beyond where a cord is capable of reaching.

电池操作的抛光剂还提供了提高的生产率。他们消除了操作员插入并将绳索移至新插座的需求。

Motor

This burnisher has a dual motor. One motor drives the pad and the other motor drives the wheels. Dual motors are more expensive but are more ergonomic for the operator. Dual motors can be set to drive which help increase worker productivity.

Dust Control

This machine has a NSS Vac-Trac dust collection system on the burnishing head of the machine. The filter collects 95% of dust particles at .3 microns and more.

如果您的设施有兴趣获得LEED认证，则防尘剂将提高室内空气质量，并可以帮助您在室内环境质量细分市场中获得积分。

Pad Pressure

This burnisher has three pad pressures and drive speed settings to adjust your burnishing process to different floors. It must be manually adjusted.

阅读我们的NSSEForce®的全面审查依靠这台机器。

最后的想法

有很多considerations when choosing which floor burnisher is best for your facility.

Money shouldn't always be the deciding factor when choosing the best floor burnisher for your facility. Choosing a more expensive burnisher with advanced features like dust control or a larger cleaning path will ultimately save you money.

If you are a large facility looking to polish floors in the least amount of time, the NSS eforce® 27 inch burnisher provides the largest cleaning path and is a ride-on, battery-operated machine that will allow you to be most productive in your space.

The 20 inch AdvanceBU800™is also battery operated, and will allow you to be most productive in areas slightly smaller than where the NSS eforce® is needed. However, for smaller facilities the cord-electric burnishers, the Advance Advolution and Clarke Ultra Speed 1500®, are good options. Sometimes deciding between these two options will be based on price.

The TASKI® ergodisc® is one of the cheapest options and although it is not best practice, is best for spray buffing for facilities who still complete this procedure.

不matter your situation we can help match you to the best burnisher for your needs whether you're located in the United States, Puerto Rico, or the Caribbean.

EBP and other Imperial Dade locations have an unrivaled selection of commercial cleaning products and janitorial cleaning equipment to help you maintain the glossy appearance of your facility's floors.

Our Team begins by understanding your needs and desired outcomes so we can suggest the best equipment choices for you. We'll guide you through the decision-making process to ensure you make the right purchase.

如果您仍然不确定哪个是您设施的最佳选择或对地板磨砂器有疑问，请让EBP Equipment Specialisthelp.

Check Out These Additional Resources:

• Advance Advolution™20XP Floor Burisher评论
• 最高的地板磨砂器评论：NSSEFORCE®
• Clarke® Ultra Speed Pro® 1500 Electric Floor Burnisher Review
• Taski®Ergodisc®1200Floor Burisher评论[视频]
• 进步BU800™Floor Burnisher: An In-Depth Review [VIDEO]
• 地板磨砂器的价格是多少？
• What Is The Difference Between Floor Buffers And Burnishers? [Video]
• What Is The Best Floor Pad For Your Buffer Or Burnisher? [Video]